Complete Reset
Prehung Unit
$750–$1,575
Installed · per opening
- New solid-core slab
- New jamb, stop and casing
- Three matching hinges
- Hardware installation
- Final fit and alignment
Best for — Damaged, uneven or completely redesigned frames.
Slab · Prehung · Closet · Barn — Whole-Home Interior
Build Your Interior
Door Package
Choose the right level of replacement, then select your solid-core slab, hinge finish, hardware and casing. Every AMG interior door project is field-measured, installed by our own crews and quoted in writing before anything is ordered.
Licensed Bay Area installer 38 Builders Choice designs In-home measure
Installed range · per opening
$550–$2,250
15-Year
AMG Workmanship
5-Year
Builders Choice Material
Authorized direct dealer for Builders Choice & Sure-Loc
Compare your four installed paths
Choose the system first. Then choose the look.
Prehung replaces the door and the frame. Slab reuses your existing jamb and swaps the door panel only.
Keep the Frame
Slab Replacement
$550–$1,250
Installed · per opening
- New solid-core slab
- Hinge preparation
- Latch preparation
- Hardware installation
- Final fit and alignment
Best for — Existing jamb secure, square and reusable.
Storage Openings
Closet Doors
$950–$2,150
Installed · per opening
- Selected door slabs
- Bypass or bifold system
- Top track
- Rollers or pivots
- Operating hardware
- Final alignment
Best for — Opening width, clearance and desired closet access.
Space-Saving Style
Barn Door
$1,050–$2,250
Installed · per opening
- Selected door slab
- Wall-mounted track system
- Rollers and mounting hardware
- Pull preparation
- Floor guide
- Final adjustment
Best for — Sufficient unobstructed wall space beside the opening.
Planning ranges vary by opening size, frame condition, selected design, finish, hardware and access. Final pricing follows an in-home measure.
Choose your door slab
38 Builders Choice designs shown
Panel · Shaker · Glass · Mirror · Closet · Barn
38 of 38 Builders Choice door designs shown — tap a design to preview it, or swipe to browse.
Solid core vs builder-grade hollow core
Every AMG interior door is solid core.
The difference is immediate — quieter rooms, a heavier close and better screw hold for hardware.
AMG solid core
- Up to 50% less sound*
- Dense engineered core
- Substantial, quieter feel
- Stronger hardware support
Typical hollow core
- Minimal sound control
- Thin skins + honeycomb
- Lightweight, hollow feel
- Less screw-hold support
Complete your door package
Hardware, hinges, casing and barn track
Four finishing decisions, all in one visit — scroll through each step below.
Step 1 · Interior hardware
Knobs & levers
Sure-Loc knobs and levers in passage, privacy, dummy and keyed functions. Click a finish to preview it on the product photo.
Durango knob
KnobTraditional rounded profile
Satin Nickel
From $39
Juniper knob
KnobLayered traditional profile
Vintage Bronze
From $39
Mesa Round lever
LeverClean lever with round rose
Satin Nickel
From $49
Mesa Square lever
LeverClean lever with square rose
Satin Nickel
From $49
Marin lever
LeverSculpted contemporary lever
Satin Nickel
From $69
Snowbird lever
LeverCurved decorative lever
Vintage Bronze
From $49
Hardware is sold separately per set; standard installation is included with an AMG door project. Finish availability varies by model — final pricing is confirmed on your written proposal.
Step 2 · Hinges
Finish & corner cut
Hinge finish
6 options · three hinges per door
Brushed Nickel
US15
Oil-Rubbed Bronze
US10B
Bright Brass
US3-4
Polished Chrome
US26
Brushed Chrome
US26D
Black
US1D
Corner / edge cut
Match existing jamb
5/8" Radius
Slightly rounded corners — the most common cut in current production builds. Matches almost every prehung jamb mortise on the market today.
1/4" Radius
Tighter rounded corner used in many older tract and remodeled homes. Required when matching existing mortises without re-routing the jamb.
Square Corner
Crisp 90° corners. Modern, contemporary, and minimalist installs — also the standard for most older Bay Area homes pre-1970s.
Not sure which cut you have? Snap a photo of an existing hinge during your free in-home measure — we'll match it exactly.
Step 3 · Casing
Trim profiles
AMG strips the old casing and re-trims every opening so the millwork looks built-in — not patched. Each profile is available in primed MDF (paint-grade) or solid pine (stain-grade).
Bevel
MC324 Profile
Profile details · side view
Clean single-bevel face with a slim 2-1/4" reveal. Transitional look that pairs equally well with shaker and traditional paneled doors — our default for mid-century and modern remodels.
Colonial
MC356 Profile
Profile details · side view
Classic stepped/stacked Colonial detailing. The Bay Area's most-installed casing for whole-home repaints, farmhouse, and traditional interiors.
Craftsman
MC434 Profile
Profile details · side view
Flat-face casing with a slightly eased outer edge — substantial 3-1/4" reveal. Perfect for craftsman bungalows, modern farmhouse, and 8-ft door openings.
Step 4 · Barn track
Sliding door track kits
Complete sliding-door track kits to pair with any 7/0 barn door design — two finishes, two lengths.
Colonial Bronze
Finish
Satin Nickel
FinishFine-line warranty protection
Two warranties. Two different protections.
15 Year — AMG Workmanship Warranty
Qualifying fit, fastening, trim integration and installation workmanship.
5 Year — Builders Choice Material Warranty
Limited material warranty. Manufacturer terms, limitations and exclusions apply.
AMG field-measures the opening, confirms fit and final pricing, then orders and installs the selected system. Handlesets sold separately. *Sound claim is a published manufacturer comparison versus a hollow flush door; actual performance varies. 5-year Builders Choice limited material warranty requires proper finishing, sealing and hanging. CSLB #1001536 · Licensed, Insured & Bonded
Take the guide with you
The AMG Interior Door One-Page Guide
All four installed paths, 38 design options, hardware finishes, hinge and casing details and warranty coverage on a single printable sheet.
Your exact price starts with an exact measure
See every option in your own home
An AMG specialist inspects each opening, confirms the right replacement path and brings real slab, hinge, casing and hardware samples before preparing your written proposal.
FAQ / 01
Common Questions
Interior Door
Cost Guide FAQ
Common questions about interior door replacement costs, solid-core upgrades, hardware, hinges, casing and AMG's installation process in the Bay Area.
01What is the difference between slab and prehung interior doors?
A slab is the door panel only and may be used when the existing frame and jamb are in good condition. A prehung door includes the door, jamb, and hinges and is often better when the opening needs a cleaner reset.
02Can I replace hollow-core doors with solid-core doors?
Yes. Many homeowners upgrade hollow-core doors to solid-core options for better privacy, less sound transfer, and a more premium feel.
03Do I need to replace the jambs too?
Not always. If the existing jambs are square, clean, and in good condition, slab replacement may work. If the jambs are damaged, inconsistent, or causing fit issues, prehung replacement may be better.
04How much does it cost to replace an interior door in the Bay Area?
AMG interior door projects typically range from $550 for a basic slab replacement to $2,250 for a barn or closet system, depending on the door style, frame condition, hardware, casing and finish work required.
05Can AMG replace all interior doors in one project?
Yes. AMG Doors & Windows can review multiple bedroom, bathroom, closet, hallway, office, and living area doors during the consultation and quote a whole-home interior door refresh as one package.
NEXT STEP / 02
Direct Interior Door Replacement dealer pricing. Certified in-house installation.
Best pricing in the Bay Area, factory-backed warranty, and a certified AMG install crew on every job — no subcontractors, no middlemen. One team from quote through final adjustment.
Comparing something else?